SUMMARY: Dump prom settings on a SunFire 280R?

[Randy Millis]

Most who responded suggested using "eeprom" and redirecting to a file:

e.g. eeprom  > filename


Joe Fletcher said:

-cut-

eeprom > output.txt

will give you some but not all of it.

-cut-


Eugene Schmidt expanded on what Joe said with:

-cut-

Most, but not all can be seen by doing:
eeprom

Alternatively, an RS232 cross cable to the serial port to another system.
(Sun/Laptop/..?)
Set capture on on Hyperterm/ "script /tmp/mylog; tip hardwire" or whatever
as required by tty session.

Reboot the server you wish to capture.

Break as system wishes to boot.

printenv

boot

Exit from tty emulator and close script/log

Make sure system boots.
-cut-

Thanks to:

Vincent Bolay, Dirk Hamilton, Michael Schulte, Nicolas Dorfsman, Mark
McManus, Stan Pietkiewicz, Brent Mcdaniel, krenzischek at Encompasserve.org,
Alan Pae, Jim Seymour, Matt Gentry, Bob Cummings, Adrian Cole, and Tim Evans
for their very speedy replies.

----- Original Message ----- 
From: "Randy Millis" <rmillisl at gdcanada.com>
To: <sunmanagers at sunmanagers.org>
Sent: Thursday, April 15, 2004 4:50 PM
Subject: Dump prom settings on a SunFire 280R?


> How can I dump prom settings on a SunFire 280R to a text file for
> documentation purposes from a running OS? Googleing and searching the
> archives did not reveal an answer.
>
> Thank you.
> _______________________________________________
> sunmanagers mailing list
> sunmanagers at sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers